|
|
Abrasive water jet cutting
Midrla, Zdeněk ; Kubík, Roman (referee) ; Osička, Karel (advisor)
This master thesis is consisted of literature search and practise part with focusing on the theme of abrasive water jet cutting. Introductory chapters deal with various methods and principles water jet cutting. Following chapters deal with quality of cutting surface by abrasive water jet cutting. After these chapters is introduced machine equipment of water jet cutting technology. At the end of this theoretical part are listed advantages and comparison with other unconventional technologies. In the practical part is solved design of machinery with regard to manufacturing technology of component flange in series 630 000 pieces per year. Last chapter describes economic evaluation of production.
|
|
|
Water Jet Cutting
Odehnal, Ondřej ; Fic, Miloslav (referee) ; Kárník, Jan (advisor)
The following bachelor’s thesis deals with an unconventional technology of waterjet cutting. Content of the thesis is focused on the description of the technology, basic classification and description of utilization methods. Machinery used in this technology is described below. At the beginning, this work introduces the history and describes the principle of the water jet. Following is the classification of the methods used for water jet. The most important components of devices operating with this technology are described in the next section. The last part is the description and evaluation of an experimental verification of theoretical knowledge. The quality of cut and the behavior of the water jet was examined for different cutting parameters on cutting samples. Evaluation of the thesis is included in the conclusion.
|
|
|
The unconventional Method of Cutting Water Jet
Prax, Ondřej ; Slaný, Martin (referee) ; Osička, Karel (advisor)
The master thesis contains a literature search dealing with the unconventional technology of water jet cutting. The first part is aimed to description of the water jet technology and shows the possibilities of controlling and awarding data for cutting. Follows the chapter about the influences of the input parameters to a surface quality and machining accuracy. The thesis also giving an account of ecological factors of the water jet cutting. The description of the whole technology for production of the sprocket is a part of the thesis. The last part of the thesis is solving the economics of the water jet cutting technology, especially for production of the sprocket with comparing dependency of the cutting conditions.
|
|
|
Proposal for the increased effectiveness of production operation of sheet metal covers at ISOTRA company
Hykel, Lukáš ; Blachut, Bohumír (referee) ; Kubík, Roman (advisor)
The thesis deals with the optimization of production lines cover sheets for external blinds. The aim of this work is to propose appropriate investment in line for expansion of capacity and the reduction of risks in the form of cooperation. To achieve the objective I propose two alternative solutions. Combination of these two variants has been optimized with regard to investment in capacity expansion, reduce risk and achieve a fast return on investment. The conclusion describes the individual prices of investment items and annual profit from the newly formed water jet technology.
|
|
|
Modulated ultrasonic water jet cutting – optimization of the liquid wave guide shape
Veselý, Radek ; Foldyna, Josef (referee) ; Habán, Vladimír (advisor)
High speed water jets have un-substitutable place in unconventional technologies in the machining of materials. Indeed its larger spreading is limited above all by its really high purchase price and also high costs of the operation. Certain possibility is represented by high-speed pulsating jets, which don’t put such a high pretension on arrangement of generating the pressure during the comparable operation. Probably the most effective method of the generating of pulsating water jets is ultrasonic modulation. This work could benefit to understanding spreading of pressure impulses between ultrasonic generator and output nozzle. Pulsating is solved by the numerical calculation using transfer matrix method.
|
|
|
Cutting of Water Jet
Zouhar, Ondřej ; Slaný, Martin (referee) ; Osička, Karel (advisor)
The work developed in the master's program, describes the technology of water jet cutting. The theoretical part deals with the description of this technology and it explains the basic concepts used in this field. The practical part was designed to verify some theoretical knowledge. Therefore, several experiments were performed, while there was studied the influence of abrasives on the final quality of the surface and the level of the generated noise. The practical part was completed by the production of the selected component and its technical and economic evaluation.
|
|
| |
|
|
Use of modern technologies in the production of flat sheet metal parts
Kohoutová, Zuzana ; Podaný, Kamil (referee) ; Špaček, Jindřich (advisor)
The final work elaborated in the scope of master's studies of the branch 2303T002 submitted use of modern technologies in the production of flat sheet metal parts from the material 11 373. Work is set for cold shaping of metal by means of cutting. Production on sequence shearing tool is based on series 350 000 pieces per year. Universal hydraulic press CUPS 63 DEU with shearing force 630 kN is selected for realization. Work is also focused on the production of the same components using plasma, laser and water CNC equipment and the subsequent economic evaluation of all variants of the production. In enclosure there is drawing documentation for cutting tool.
|
|
|
Innovation of the laboratory stand Water jet
Šimůnek, Petr ; Rudolf, Pavel (referee) ; Hudec, Martin (advisor)
The subject of this bachelor's thesis is the design of a new experimental device for measuring the force of a water jet on various shaped surfaces. The first part of the work is focused on the theory around the task. The second part deals with the parts of the device. And in the third part is carried out exemplary calculation.
|
|
|
Unconventional machining processes
Exnerová, Jitka ; Mouralová, Kateřina (referee) ; Kalivoda, Milan (advisor)
This thesis deals with the methods of the unconventional machining. The first part outlines the history of the machining methods, their characteristic and use follows. The second part aims at the method of the water jet, its technology, safety use, its advantages and disadvantages. Subsequently the thesis presents selected companies dealing with water jet cutting technology. At the end the thesis presents the environmental impact of the water jet cutting.
|
guest ::
